Negotiable
The date of payment from buyers deliver within days
Jiangsu
Long-term effective
2017-12-16 06:56
128
Company Profile
By certification [File Integrity]
Contact：Ms. Carolyn Zhou(Mr.)
Email：
Telephone：
Phone：
Area：Jiangsu
Address：Jiangsu
Application for Reverse Osmosis Water Treatment System:
The key part of Reverse Osmosis Water Treatment System is reverse osmosis membranes that is from the America, it has a good performance to eliminate salts and the high pressure pump is from a high quality pump producer in China, it's easy to handle for its simple structure. The source water, in the case that the conductivity is less than 500us/CM, can reach the national standards totally after treatment by this device, it's the most ideal equipment for water treatment.
RO membrane:reverse osmosis selected Dow or HYDRANAUTICS aromatic polyamide membrane and supporting material of glass fiber reinforced plastic pressure vessels dedicated RO membrane element 30, sub-6 installed in pressure vessel, the installation water production quantity is 30.0m3/h , water recovery rate is 70%, desalination rate is 97%.
High-pressure pump: provide power to reverse osmosis, use multi-level Vertical pump.
RO protect system: set up pressure switch on inlet and outlet of the high-pressure pump.
When the pressure of the inlet is lower then the limit value (water scarcity≤0.05Mpa) or the pressure of the outlet is higher than limit value(P≥1.8Mpa),the pressure switch send signals to the control system and alarm, high-pressure pump stop running automatically, to ensure the safety of the RO system. The high-pressure pump is equipped with valve; the reverse osmosis membrane can lift pressure slowly, to avoid the damage of high-pressure water impact. RO concentrated water end set electrically operated valve, used when low-pressure rinsing. There will be auto low-pressure rinsing 10-20min when RO system stops running, to avoid deposition and fouling on the membrane surface. Regular low-pressure large flow auto cleaning of reverse osmosis system.
Display: RO water product quantity display online.
System control: The system use centralized control method (auto and manual two statuses).There is a process control box, operation status is clear. Each tank's liquid level.
Remarks:
* We will recommend the right membrane model according to customer's raw water report such as TDS, heavey metal content, etc.
